Inquiry
Form loading...
Products Categories
Featured Products

Microbulk Cryogenic Tank

The photos show an upright stainless steel microbulk tank from two angles, with its external piping, valves and vaporizer. Specify the required capacity and service medium when requesting a quote.


    The photos show an upright stainless steel microbulk tank from two angles, with its external piping, valves and vaporizer. Specify the required capacity and service medium when requesting a quote.

    Tank configuration

    The upright PLB microbulk range uses a vacuum-insulated vessel with external valves, piping and gauges. Compare the model volumes and pressure variants for your intended cryogenic service.

    External valves and piping on the stainless reference tank.

    Model comparison

    Specification PLB-3 PLB-5 PLB-7.5 PLB-10
    Total vessel volume (m³) 3.0 4.99 7.5 9.89
    Inner vessel head diameter (mm) 1,300 1,650 2,050 2,250
    Outer vessel head diameter (mm) 1,500 1,800 2,250¹ 2,400
    Static evaporation rate, liquid nitrogen (%/day) ≤0.66 ≤0.45 ≤0.4 ≤0.35
    Overall dimensions, L × W × H (mm) 2,000 × 1,880 × 3,100 2,150 × 2,250 × 3,350 2,800 × 2,780 × 3,380 2,880 × 2,800 × 3,330
    Chassis, L × W (mm) 1,800 × 1,800 2,000 × 2,000 2,450 × 2,450 2,550 × 2,550
    Filling inlet height (mm) 1,070 1,170 1,170 —
    Pressure-building unit (Nm³/h) 25 25 45 25
    Vaporizer (Nm³/h) 75 105 150 200

    ¹ The PLB-7.5 outer head entry is recorded as 2,250 × 8 mm in the specification. Confirm the final dimensions on the order drawing.

    Pressure variants

    Select the pressure variant and confirm compatibility with the required fill medium when requesting a quotation.

    Model Inner design pressure (MPa) Inner maximum working pressure (MPa) Outer vessel pressure (MPa)
    PLB-3 1.6 1.6 −0.1
    PLB-3 2.3 2.3 −0.1
    PLB-3 3.3 3.3 −0.1
    PLB-5 1.6 1.6 −0.1
    PLB-5 2.3 2.3 −0.1
    PLB-5 3.3 3.3 −0.1
    PLB-7.5 1.65 1.6 −0.1
    PLB-7.5 2.4 2.3 −0.1
    PLB-7.5 3.5 3.3 −0.1
    PLB-10 1.0 1.0 −0.1

    Construction specifications

    Specification PLB range
    Orientation Vertical, flat base
    Design standards listed TSG 21, GB/T 150 and GB/T 18442
    Design temperature, inner / outer −196 °C / 50 °C
    Filling ratio 95%
    Inner shell and head S30408, GB/T 713
    Outer shell and head Q345R, GB/T 713. Optional S30408, GB/T 713.
    Service media Liquid nitrogen, oxygen, argon or carbon dioxide. Confirm the pressure variant for the selected medium.
    Insulation High-vacuum multilayer insulation
    Inner vessel support Neck-suspended
    Internal and external piping S30408, GB/T 14976

    Factory testing and dispatch

    Specification PLB range
    Helium leak test Yes
    Vacuum interspace leak and outgassing rate 1 × 10⁻⁶ Pa·m³/s
    Inner vessel holding pressure at dispatch 20 kPa
    Vacuum level at dispatch ≤0.01 Pa

    Production Workshop

    Workshop views of cryogenic cylinder shells, storage racks and vertical and horizontal assemblies.

    Cryogenic cylinder shells in the workshop
    Cryogenic assemblies on storage racks
    Upright cryogenic cylinders with top valve assemblies
    Horizontal cryogenic cylinders in handling frames
    Vertical cryogenic cylinder assemblies staged indoors
    Framed vertical cryogenic cylinders in the equipment area

    Packing & Shipping

    Upright cryogenic cylinders staged in a batch
    Finished cryogenic cylinders grouped in the stock area
    Horizontal cryogenic cylinders supported in individual frames
    Upright cryogenic cylinders arranged for batch handling
    Vertical cryogenic cylinders inside handling frames
    Horizontal cryogenic cylinders arranged in protective frames
    Wrapped microbulk tanks in the equipment holding area
    Microbulk equipment protected by wrapping
    White microbulk tank on its base in the equipment holding area

    LEAVE YOUR MESSAGE TO US